3M Car Sound Proofing 46cm X 5 meters per roll Deadening Insulation Heat
Size: 46cm x 5meter / roll
- Conformable pad quiets noise around trunks, door panels, hoods, floor pans and more
- Self-adhesive material is easy to install without any special tools
- Multi-purpose sound deadening mat reduces road noise, sound system vibrations, and rattles
- Easy-to-cut material fits easily around a variety of stamped shapes
- Center perforation allows easy door panel installation
Directions for Installation -->
1. Surface Preparation:
- Surfaces must be clean, dry and free from oil or grease.
- Wash the surface with soap and water to remove water soluble contaminants.
2. Application Method:
- Cut Sound Deadening Pads to size and shape using scissors or knife.
- Remove the tan paper liner and apply using strong, even pressure.
- To increase conformability and/or initial adhesion, the pads may be preheated to approximately 95°F - 115°F.
- Do not attempt to apply sound deadening pads at temperatures below 40°F.
- If the Sound Deadening Pad is to be painted, peel off the clear protective film from the surface in order to achieve good paint adhesion.
- If a thicker or heavier application is desired, multiple pads may be stacked, making sure to first remove the clear protective film in between pads.