If you are worried about your car being damaged by others after parking, you can use our step-down cable to connect to the DVR to ensure that the recorder works 24 hours a day. If someone hurts your car and the vibration triggers the G-sensor, the DVR will immediately turn on and record the situation.

Step-down line:

The use of the step-down wire does not occupy the cigarette lighter interface.

First connect the negative pole (black wire) of the step-down wire to the ground of the car fuse box;

Secondly, if you want to continue monitoring after parking (the hard disk video recorder works 24 hours a day), connect the positive (red wire) of the step-down line to the BAT interface of the car fuse box;

If you want to stop monitoring after parking (the hard disk video recorder does not work after parking), connect the positive pole of the voltage drop line to the ACC interface of the fuse box.

How to hide the parking cable?

1. Connect the Cae ACC power supply, when the car engine is started, the dvr will automatically turn on, and when the car engine is turned off, the dvr will automatically turn off.

2. Connect the car battery or regular power, can support 24 hours power supply dvr work, sipport car dvr is a parking monitoring function.

✅Over Load Protection

✅Short Circuit Protection

✅Over Current Protection

✅Reverse Connection Protection

✅Low Voltage Protection (cut power supply to dashcam in order to the protect car battery effectively)